G-ABA Lifting point for welding
Ideally suited for hot-dip galvanizing

- Can be loaded on all sides in all directions and increased load-bearing capacity at ring level.
- 4 times safety against breakage.
- Wear markings inside and outside, making them easy to recognize when they are ready to be discarded.
- Closed and circumferential fillet weld, which prevents rusting.
- Ideally suited for hot-dip galvanizing
Variantes de producto (3)
G-ABA-1t - Cáncamo, soporta esfuerzos en todas las direcciones. (7913870)
Datos técnicos
N.º de artículo: 7913870

Atributo | Valor | Valor |
---|---|---|
AtributoPeso | Valor0.55 kg | Valor1.21 lbs |
AtributoCapacidad de carga WLL | Valor1000 kg | Valor |
AtributoT | Valor42 mm | Valor1-21/32" |
AtributoA | Valor32 mm | Valor1-1/4" |
AtributoB | Valor18 mm | Valor23/32" |
AtributoC | Valor104 mm | Valor4-3/32" |
AtributoD | Valor35 mm | Valor1-3/8" |
AtributoE | Valor18 mm | Valor23/32" |
AtributoF | Valor59 mm | Valor2-15/16" |
Descargas de la variante del producto
G-ABA-2,5t - Cáncamo, soporta esfuerzos en todas las direcciones. (7913871)
Datos técnicos
N.º de artículo: 7913871

Atributo | Valor | Valor |
---|---|---|
AtributoPeso | Valor1.36 kg | Valor3.00 lbs |
AtributoCapacidad de carga WLL | Valor2500 kg | Valor |
AtributoT | Valor59 mm | Valor2-15/16" |
AtributoA | Valor41 mm | Valor1-5/8" |
AtributoB | Valor23 mm | Valor29/32" |
AtributoC | Valor137 mm | Valor5-3/8" |
AtributoD | Valor50 mm | Valor1-31/32" |
AtributoE | Valor21 mm | Valor13/16" |
AtributoF | Valor80 mm | Valor3-1/8" |
Descargas de la variante del producto
G-ABA-4t - Cáncamo, soporta esfuerzos en todas las direcciones. (7913872)
Datos técnicos
N.º de artículo: 7913872

Atributo | Valor | Valor |
---|---|---|
AtributoPeso | Valor2.93 kg | Valor6.46 lbs |
AtributoCapacidad de carga WLL | Valor4000 kg | Valor |
AtributoT | Valor72 mm | Valor2-27/32" |
AtributoA | Valor59 mm | Valor2-15/16" |
AtributoB | Valor35 mm | Valor1-3/8" |
AtributoC | Valor176 mm | Valor6-15/16" |
AtributoD | Valor60 mm | Valor2-3/8" |
AtributoE | Valor27,5 mm | Valor |
AtributoF | Valor99 mm | Valor3-7/8" |