VIP Swivel connector
With a ball bearing which enables swiveling under load. Can be versatilily combined with all VIP components by means of the clevis connection using the adapter link. Insensitive to dirt owing to the sealed body. Connecting bolt and tensioning sleeve are pre-assembled. The DGUV-rule 109-017 stipulates that lifting means never be used while in a twisted condition. This requirement is automatically met by the VWA because of the integrated ball bearing.
Hint: Install the VWA in such a way that the bending of the adapter link is not possible while in use. Not suitable for permanent use and swiveling under full load. Avoid bending of the appliance.
Product variants (2)
VIP-Swivel connector VWA-20 (7990723)
Technical information
Article number: 7990723
| Attribute | Value | Value |
|---|---|---|
| weight | 7.28 kg | 16.05 lbs |
| Nominal WLL | 16000 kg | 35300 lbs |
| T | 147 mm | 5-25/32" |
| A | 100 mm | 3-15/16" |
| B | 21 mm | 13/16" |
| C | 37 mm | 1-7/16" |
| D | 25 mm | 63/64" |
Downloads of the variant
VIP-Swivel connector VWA-22 (7100634)
Technical information
Article number: 7100634
| Attribute | Value | Value |
|---|---|---|
| weight | 7.77 kg | 17.13 lbs |
| Nominal WLL | 20000 kg | 44000 lbs |
| T | 147 mm | 5-25/32" |
| A | 102 mm | 4" |
| B | 23 mm | 29/32" |
| C | 38 mm | 1-1/2" |
| D | 28 mm | 1-1/8" |